Tuesday 11 October 2011

Retro Caravan: Starting the Interior

Painting the mini caravan
Well, my experiment with contact paper for the outside was not hugely successful. In some lights it looked fine; at other times you could see little air bubbles, so I ripped it all off. Then I had to sand the wood again and give it all another coat of white paint. Once that dried I painted the bottom half of the caravan's sides with red paint. I'm happy with it now.
Starting on the retro caravan interior
  Then I could get cracking on the interior. For the floor I used Formica samples from a kitchen shop. These are stuck down with UHU glue. The samples had writing on them but that came off with a swipe of nail polish remover. I made a little floor mat with red and white tape glued to a piece of formica.
  The table I made from a kitset. It has a Formica top and metal strip around the sides to give that real 1950s look. 
   The long bench seat and the two smaller seats are made from balsa wood. For the cushioned parts I glued foam rubber onto the balsa and then stretched and glued fabric over it like wrapping up a parcel.
  Nothing that you see in the photo is glued into place yet. I still have to paint the sides of the seating. I'll get onto that soon. Then it will be ready to do the next stage at our November club meeting  

1 comment:

  1. Its coming along wonderfully.. Looking forward to November... :P

    ReplyDelete